Printer hardware parts processing matters needing attention
Release time:
2022-10-08
In the process of printer hardware accessories, it is often encountered that the shape of the blanking size deviation is large, which affects the entire production accuracy and must be overcome. There are many reasons for this problem, but there are mainly three aspects: die size, machining accuracy machine blanking clearance, etc. The prevention of blanking size error should also start from these aspects. So, here we come to understand the printer hardware processing matters needing attention.
InPrinter hardware accessoriesIn the process, it is often encountered that the shape of the blanking size deviation is large, which affects the entire production accuracy and must be overcome. There are many reasons for this problem, but there are mainly three aspects: die size, machining accuracy machine blanking clearance, etc. The prevention of blanking size error should also start from these aspects. So, here we come to understand the printer hardware processing matters needing attention.
First of all, the printer hardware accessories are trained on the blanking blade before blanking to check whether the blanking gap is reasonable. In addition, it is also necessary to compress the lead wire before the bending of the accessory, the lead wire in the bending, and the material in the bending process to avoid the accessory from slipping during bending.
Secondly, when the blanking edge is worn, the tensile stress of the material becomes larger, and the metal parts will be rolled and twisted. Therefore, the size of the punch can also be adjusted by adjusting the amount of pressure on the material. In the actual operation, it is better to find solutions for specific reasons.
Due to improper operation and other factors, there are many problems in hardware raw materials, resulting in a decline in product quality. It is required to understand the problems of hardware raw materials and find preventive measures.
Note when processing printer hardware accessories:
1. Before the machine works, check whether there is lubricating oil supply in the moving part, start to check whether the clutch and brake are normal, the machine is idling for 1-3 minutes, and the machine is strictly prohibited if the machine is faulty.
2, the correct attitude to work, have enough spirit to treat the work, found that the body is unwell to leave the post immediately, to reflect to the leadership. During operation, we must focus on consideration. It is strictly forbidden to talk and cooperate with each other. Operators should not operate in a state of irritability and fatigue to avoid accidents and ensure safe operation. All employees will check whether their clothes meet the job requirements before entering the workplace. Do not wear slippers, high heels or safety-affecting clothing. Those with long hair please wear helmets.
3. When replacing the mold, the power supply should be cut off first, and the stamping movement department can stop running before starting to install and debug the mold. After installation and debugging, move the flywheel twice to test the pressure by hand to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the rim is in a reasonable position.
4. When processing printer hardware accessories, all other people leave the mechanical workshop and take away the garbage on the workbench before starting the machine.
5, printer hardware parts processing mechanical operation, prohibit the hand into the sliding work area. It is forbidden to take or place the workpiece by hand. When picking and placing workpieces in the die, use standard tools. When the machine makes an abnormal sound or the machine fails, please turn off the power switch immediately for inspection. After starting the machine, one person is allowed to carry materials and operate the machine, while others are not allowed to push the electric device or step on the pedal switch board with their feet. In addition, hands cannot enter the working area of the machine, nor can they touch the moving parts of the machine.
6. When leaving work, turn off the idle power supply to ensure that the finished products, leftoff and garbage of the post are summarized to ensure that the working environment is clean and safe.
The above is the printer hardware processing matters needing attention. If you need to know more, you can contact us at any time! Our company has many years of experience and looks forward to your joining at any time.
Address
No. 27, Jinfeng West Road, Jinding Industrial Park, Tangjiawan Town, Zhuhai City
Telephone
Fax
+86756-3911028
Zhuhai Sanyuan Hardware Products Co., Ltd.Website Construction: www.300.cn SEO
SAF Coolest v1.3.1.2 设置面板 FVPSX-AWGZ-ESSVE-FDS
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page